A1 Uppers

TNTE Stripped A1 Upper Receiver with M4 Ramps

Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a 7075 T6 aluminum forging, then is machined to mil-spec dimensions. Once...

5.56 A1 "Colt" 653 Clone Upper 1/7 14.7" Barrel

HISTORY / BACKGROUND:This was the final "all A1 Component" Carbine Model in the Colt 600 Series, and the second carbine configuration built with a 14.5" barrel. This Carbine was primarily used by US Special Operations, to include the Army Rangers and...

A1 11.5 Commando Lite 1/7 Upper

5.56 11.5" A1 BB Upper 1/7  Looking for a clone of the colt commando upper? Look no further! Our commando clones are built with standards that are second to none using top tier materials. Our government contour barrel features a .625 1/7 pencil...

603 M-16A1 AR-15A1 1/12 Upper

5.56 20" A1 Rifle length Upper 1/12  Here is one of our favorite custom builds. We decided to try and rebuild the old school M-16A1. These are using .625 Government barrel with a 1/12 twist. The pencil barrel is made of 41V50...

5.56 A1 "Colt" 653/723 Clone Upper 1/7 16" Barrel

HISTORY / BACKGROUND:This was the final "all A1 Component" Carbine Model in the Colt 600 Series, and the second carbineconfiguration built with a 16" barrel. This Carbine was primarily used by US Special Operations, toinclude the Army Rangers and Navy...

603 M-16A1 AR-15A1 1/7 Upper Non Ramped

5.56 20" A1 Rifle length Upper 1/7  Here is one of our favorite custom builds. We decided to try and rebuild the old school M-16A1. These are using .625 Government barrel with a 1/7 twist. The pencil barrel is made of 41V50...

11.5" 5.56 Nato 1/7 A1 QPQ Upper

Specs: Barrel: 11.5" 1/7 TNTE QPQ (melonite/nitride) 4150 Barrel Upper: TNTE A1 (No Shell Deflector) 7075-T6, type 3 hard coat with DFL Handguards: Round Carbine Style with Heat Shields Flash Hider: A2 Flash Hider Milspec M16 BCG Milspec Charging...

10.3" 5.56 Nato 1/7 A1 Upper

Specs: Barrel: 10.3" 1/7 5.56 Nato Chrome Lined Barrel Upper: TNTE A1 (No Shell Deflector) 7075-T6, type 3 hard coat with DFL Handguards: Round Carbine Style with Heat Shields Flash Hider: A2 Flash Hider Milspec BCG Milspec Charging Handle This is...

603 M-16A1 AR-15A1 1/8 Gunner Upper

5.56 20" A1 Rifle length Upper 1/8  Here is one of our favorite custom builds. We decided to try and rebuild the old school M-16A1. These are using .625 Faxon Gunner barrel with a 1/8 twist. The pencil barrel is made of 41V50...

603 M-16A1 AR-15A1 Upper 1/7 .750 Barrel

5.56 20" A1 Rifle length Upper 1/7   Here is one of our favorite custom builds. We decided to try and rebuild the old school M-16A1 HB (606,611,615,621). These are using .750 Government barrel with a 1/7 twist. The Gov barrel is made...

5.56 1/7 XM-177 C7 QPQ Style Upper Triangle

This upper offers a 11.5" 4150 QPQ barrel with a 1:7 RH military twist rate. The Flash hider is 5.5" long and pinned for NFA compliance. It is also made of chrome-moly steel and HP tested. Our barrels are Mil-Spec. The upper is C7 A1 Mil-spec and at...

XM4 A1 QPQ 1/7 Upper 14.5 ext A2 (653,723 Rebuild Inspired)

The 80's and 90's saw major changes to the modern duty rifles carried by US forces. Most notable the adoption of the carbine gas system and shorter barrel over the longer rifles. These advancements where directly related to the requests from special...