Quick view Details sku: A2-RSK A2 Rear Sight Kit MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped MSRP: Now: $299.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: A2-RSK A2 Rear Sight Kit Complete A2 rear sight kit. This kit requires assembly and will mount on an A2 upper receiver. See listing and schematic below for kit contents. A2 Rear Sight Kit *Requires assembly Includes: A2 Rear Base Lug A2 Rear Sight Aperture Rear Base Flat... MSRP: $75.00 Now: $65.00 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BL604 Billet 604 A1 Slab (Slick) Side Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 does have M4 Feed Ramps MSRP: $299.99 Now: $259.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BLC7-SM4 Billet C7/C8/M16E1 Stripped Upper Receiver with M4 Ramps Upper receiver comes stripped without ejection port cover, forward assist or rear sight. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have... MSRP: $300.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BLA1S Billet TNTE Stripped A1 Upper Receiver without M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $299.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BLA1S-M4 Billet TNTE Stripped A1 Upper Receiver with M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $315.99 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BLA2S Billet A2 Stripped Upper Receiver Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. A2 carry handle style. Precision machined from a premium-grade 7075 aluminum billet and hardcoat... MSRP: $400.00 Now: $269.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BL635 Billet 9mm A1 Upper Receiver Stripped Billet M16 Upper Receiver from USGI Contractor, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BLA2-9 Billet 9mm A2 Upper Receiver Stripped Billet A2 Upper Receiver, Model 635, Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6, comes with port door MSRP: Now: $299.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BL604-C Billet 604 A1 Slab (Slick) Side Upper Receiver Complete Billet M16 Upper Receiver from USGI Contractor, Model 604 "Slick Side", Black Type 3 Hard coat Mil Spec Anodized with DFL, 7075 T6 Aluminum, M4 Feed Ramps, Assembled with new production rear sight. MSRP: $325.00 Now: $309.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BLC7-A4 Billet C7/C8/M16E1 Assembled Upper Receiver with M4 Ramps Upper receiver comes completely assembled. Billet from 7075 aluminum that has been T6 and hard coat anodized (Mil-A-8625A) with DFL. Features an A1 style fixed carry handle and shell deflector. These do have M4 feed-ramps. MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view TNTE Custom | sku: UP-BLA1-M4 Billet TNTE Assembled A1 Upper Receiver w/M4 Ramps Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected
Quick view TNTE Custom | sku: UP-BLA1 Billet TNTE Assembled A1 Upper Receiver Features specific to the M16A1 Upper Receiver are the original A1 profile, with no shell deflector, A1 rear sight housing and proper carry handle contours. The upper starts off as a Billet 7075 T6 aluminum, then is machined to mil-spec dimensions. Once... MSRP: $350.00 Now: $319.99 Out of stock Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected